time2012/02/25
Granule packaging machine maintenance
Granule packaging machine maintenance for long-term use is essential.
Lubrication
1, Vertical packing machine the box part of the machine is equipped with a fuel gauge, before driving all the grease once halfway according to the
bearing temperature rise and functioning of the addition.
, Worm gear box must be long-term storage of oil, the oil surface height for the worm all invasive oil, such as the frequent
use of every March a new oil once a provincial judge bottom drain plug, you can put the oil.
3, in the refueling of the machine, do not make the oil overflow cup, not to flow around the machine and the ground. Because
the oil is easy to material contamination, affecting product quality.
Maintenance instructions
Regularly check parts, conducted once a month, check the worm, worm, liquid packing machine lubrication on the bolt, bearings and other activities
segment of the rotating flexible and wear and found that the defects should be repaired in time, it may not be reluctant to
use.
2, the machine should be placed on a clean dry indoor use, and shall contain acids and other corrosive gases to the body
circulation spaces in the atmosphere.
3, the machine after use, or stop, you should remove the rotary drum washing and brush remaining powder will clear bucket,
and then installed and ready for the next use.
4, when the drum before and after work, ran the M10 screws on the bearing soldier before the adjustment to the appropriate
location. Gear shaft ran, adjust the bearing frame behind the M10 screw to the proper position, adjust the gap to the bearing
sound, hand turn the pulley, elastic proper and appropriate, too tight or too loose to make this machine the possibility of
damage.
5, Such as the disabled a long time, granule packing machine the machine body wipe clean parts of glossy coated anti-rust oil, use cloth Punta cover.
Granular packaging machine
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.